Система очистки воды Ultrafiltration system in a 40ft container

Preis: Contact us for price
Marke: Ultrafiltration system
Ultrafiltration system in a 40ft container
Process specification
Raw water Groundwater
surface water
pre-treated waste water
Flow capacity 12 to 38 m³/h
Water temperature 2 to 35°C
pH 6,5 to 9,0
Membrane pore size 0,02 μm
Membrane module no 2 x 4
Membrane surface per module 60 m²
Membrane surface total 480 m²
Suspended solids inlet ca. 0,5 to 50
max. 100 mg/l
Suspended solids outlet < 0,5 mg/l
Maximum pressure in plant 5,0 bar
Main components
Pre-filter with automatic backwash
Flocculation with pH adjustment
Ultrafiltration
Backwash
Chemical enhanced backwash (CEB)
Dosing station for flocculation and pH adjustment
Dosing station for chemical enhanced backwash (CEB)
Compressed air system for integrity test and pneumatic drives
Optional component
Neutralisation (outside of the container)
Pipe and fittings
Water and waste water PP
Chemicals dosing station PP and PVC
Chemicals do dosing point EPDM hose with PVC protective pipe
Control panel
PLC System fabricate T-Box
Bus System Modbus
Operation and monitoring 15 inch touch panel
Remote control/monitoring
Container dimensions
Construction 40 feet standard sea container
Number of containers 1
Height x width x length 2.591 mm x 2.438 mm x 12.192 mm
Weight (without water) approx. 15.000 kg
Weight (in operation) approx. 25.000 kg
Possibility for transport
loading and moving the container
 By using crane and wire or steel chain over 4 pieces upper ISO-edges
 By using crane and wire or steel chain over 4 pieces lower ISO-edges
 Pockets for forklift truck are not foreseen on the container
Please apply the instruction manual of the container manufacturer for transport
loading and moving the container
as well as during preparation of the ground and storing position of the container
Medium connections
The container has several windows
which are equipped with cover and screw. Through these windows the pipes for the mediums and cables for the electrical power are connected with the container
Medium connections Flange EN 1092-1/10/DIN 2576 PN 10
Raw water 2 x DN 80
Waste water 2 x DN 125
Filtrate 1 x DN 125
Drain 1 x DN 125
1 x DN 80
Electrical power supply
Main electrical power supply for the container would be connected to the control panel
which distributes the electricity to the electrical consumers within the plant. The connection of the main cable from the voltage supply source to the control panel must be done by special qualified electrician
Required cable cross section 25 mm²
Required safety fuse (on site) 63 A
Voltage supply three-phase current 400 V
Optional equipments outside of the container
Following equipment is to be placed outside of the container and must be transported separately
Neutralisation tank with agitator
Diameter 2300 mm
Useful volume 5 m³
Agitator rated power 1,5 kW
The system consists of
Raw water supply
pre-filtration
flocculation stage
ultrafiltration
backwashing and chemically assisted backwashing
neutralization
dosing stations
valve terminal
compressor unit
measuring devices
control and piping
The raw water supply is regulated automatically
either via the fill level in the flocculation tanks or via the flow meter in the inlet for ultrafiltration
Prefiltration via a self-cleaning filter with automatic control
The flocculation can take place either in a tube flocculator or in one or two stirred tanks connected in series. There is also the option of connecting the tube flocculator and the stirred tank in series. A feed pump is provided at the outlet of the flocculation container
The ultrafiltration group consists of 8 UF modules which can be operated together as one line or in two lines. The UF modules are provided on a UF rack
which has a compact but accessible structure for monitoring and maintenance activities
The filtrate from the ultrafiltration is stored in a filtrate container. An overflow pipe ensures that there is always a sufficient amount of filtrate available for rinsing in the tank. The filtrate container is equipped with a ventilation filter to prevent contamination from the ambient air
Backwashing by means of a frequency-controlled backwash pump is either time-controlled
when a maximum permissible transmembrane pressure (or minimum flux) is reached or triggered manually. The system is designed so that one line can be operated while the other line is backwashed or dry cleaned
The wastewater from the chemically assisted backwashing – controlled by continuous pH measurement at the outlet of the UF backwashing line – is automatically diverted into the neutralization tank. The pH value of the waste water is continuously measured in the neutralization tank and adjusted to a permissible value by adding acids or alkalis
The dosing stations are located in a separate chemical compartment of the container in the following version
Dosing pallet with dosing pump and fittings firmly piped. The dosing plates are each equipped with a drip tray and transparent PVC splash protection
Power each 1.1 kW
dosing container material PP
Dosing station flocculant – flow rate: 7.5 l / h
pressure: max. 16 bar
content: 400 l
Dosing station acid-alkali for pH adjustment – flow rate: 12 l / h
pressure: max. 12 bar
content: 400 l
Dosing station acid for CEB – delivery rate: 150 l / h
pressure: max. 4 bar
content: 140 l
Dosing station lye for CEB – flow rate: 150 l / h
pressure: max. 4 bar
content: 100 l
Dosing station NaOCl for CEB – flow rate: 17 l / h
pressure: max. 7 bar
content: 5 to 7 l
In the air-compressor unit
compressed air is produced for control air of the pneumatically driven fittings and for the membrane integrity test. The compressed air system runs on / off independently through the internally installed pressure switch
The system is designed for automatic operation so that it can be operated on site without constant monitoring of the operating staff
producer
type designation: Containeranlage
Pieces 8 Ultrafiltration modules
Filter surface 60 m² per module
Pressure 1.5 bar max. Transmembrane pressure (filtration)
Pressure 3.0 bar max. Transmembrane pressure (backwash)
Dimensions 1497 x 710 x 2400 mm UF rack dimensions
Description Vorfiltration / Pre-filtration Filter fineness <300 µm - Minimum differential pressure for flushing: 0.3 bar
max. flow rate: 40 m³/h - Accessories: differential pressure switch
Description Rohwasserzuführung / Raw water supply Tauchmotorpumpe
frequenzgeregelt
Fördermenge: 40 m³/h
Förderdruck: 2,5 bar
Leistung: 7,5 kW
Description Flockungsstufe / flocculation stage Flocculation tank (PP)
2 x 0.5 m³
feed pump
frequency controlled (40 m³ / h
5.5 kW)
static mixer (PP)
pipe flocculator (PP)
Description Rückspülung / backwashing Filtrate container (PP) volume 4,7 m³
flow rate 115 m³/h at discharge pressure 3 bar
power 18,5kW
Description Neutralisation / neutralization Neutralization tank (PE)
useful volume: 5.0 m³
shaft and agitator (steel coated)
output 1.1 kW each
Description Steuerung / control PLC brand: PMA type T-Box
15 “touch panel
remote control / remote monitoring
Find more here
показать контакты
Contact us at
показать контакты