Кромкооблицовочный станок Homag KAL210 AMBITION 2264 - ZHR 05/L/085

Machine Nr: 0-200-26-3219
Tension: 400V 50Hz 3Ph
Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm
Max. panelsizes: 2000 x 800 mm., min. 300 x 150 mm
Fixed side at the left
Feedspeed 18 - 25 m/min
Working width min 60mm for panel thickness 22mm
105mm for panel thickness 40mm
Panel overhang 30mm
Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)
Coil diameter 830 mm
Equipment
Sprayers release agent
Squaring device with 2 motors each 3 kW
Edge heating
Edge magazine for 2 coils
guillotine for edges up to 3 mm
Glueing part A20 with quickmelt application
Lateral pressure zone K
1 driven and 6 after pressing rollers
End trims HL84
2 motors each 0,8kW
Rough trimming
2 motors 1,5kW
Contour trimming
2 exchange units
Profile scraping PN10
Flat scrapers FA11
Sprayers cleaning agent
Buffing
Automation package straight/chamfer
Automatic adjustment infeed fence
Automatic setting of pressure rollers
Pneumatic setting of end trims
Pneumatic setting of rough trims
Automatic setting of chamfer/radius on the contour trims
Pneumatic setting of profile and flat scraping units
Electronic height positioning
ZHR 05/L/085
Return conveyor for panels coming out of a single sided shaping or edge banding machine with fence at the left and with a length of approx. 8,5 m
At the machine outfeed
a tilting air flotation table brings the panels on the return conveyor belt
Long panels pass a fence roller which turns them lengthwise on the return belt