Nauja poliakalė Turchi 260F / In stock
Susidomėjote skelbimu?
1/21
76 000 €
Markė:
Turchi
Modelis:
260F / In stock
Tipas:
poliakalė
Pagaminimo metai:
2024
Grynasis svoris:
4 800 kg
Vieta:
Vokietija Leipzig6986 km nuo jūsų
Vokietija Leipzig6986 km nuo jūsų
Patalpinimo data:
vakar
Numeris pardavėjo sandėlyje:
+380 67 005 0 228
Variklis
Markė:
Yanmar 4TNV88
Galia:
35 kW (47.62 AG)
Tūris:
2 190 cm³
Cilindrų skaičius:
4
Būklė
Būklė:
naujas
Garantija::
1 metus
Nuotolinė apžiūra
Technikos gabenimas
Papildoma informacija
Spalva:
oranžinė
Svarbu
Šis pasiūlymas yra skirtas tik bendrai informacijai. Tikslios informacijos klauskite pardavėjo.
Patarimai perkantiems
Pardavėjo kontaktiniai duomenys
Yuri
Kalbos:
ukrainiečių, anglų
+40 729 49...
Rodyti
+40 729 497 070
Adresas
Vokietija, Saksonija-Anhaltas, 04109, Leipzig, Thomaskirchhof, 22
Pardavėjo vietos laikas:
10:31 (CEST)
Pardavėjo kontaktiniai duomenys
Aleanda
Vokietija
3 metai su „Machineryline“
4.5
46 atsiliepimai
+40 729 49...
Rodyti
+40 729 497 070
+380 67 005...
Rodyti
+380 67 005 0228
Parduodate techniką ar transporto priemones?
Darykite tai su mumis!
Panašūs skelbimai
kaina pagal užklausimą
2024
2 m/h
Kasimo gylis
4,4 m
4,4 m
Ukraina, Chernivtsi
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad
Weight kg 4500
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad