Naujas padėklų pakavimo robotas ISG Pack Easy Wrap 2000AW

The Easy Wrap 2000 AW pallet wrapper is a semi-automatic machine designed for wrapping palletised loads using stretch film. Its table design allows direct access to the load by means of a pallet truck. The machine is electrically powered and requires an energy output of 1 kW. The Easy Wrap 2000 AW pallet stretch wrapper adopts film tensioning by means of a mechanical clutch (located on the top of the reel carriage) that can be manually adjusted by the operator.

he new software and graphic restyling developed for the Easy Wrap wrappers will allow even less experienced users to make the most of the potential offered by the machine thanks to simple and intuitive work procedures that can be managed from the new 7.2" colour touch display.

GENERAL CHARACTERISTICS OF THE PALLET WRAPPER

The Easy Wrap 2000 AW pallet wrapper has a plate diameter of 1650 mm (standard) and can handle products with dimensions of L 1000 x W 1200 x H 2200 mm, supporting a maximum plate weight of 1200 kg. In addition to the possibility of adjusting the number of revolutions on the bottom and top of the pallet, it is also possible to adjust the soft start of the table by means of an inverter. The machine is equipped with a PLC and a 7.2 colour touch screen display, which allow the adjustment of further parameters such as carriage ascent and descent speed, photocell reading delay, cycle counter, etc.

TECHNICAL FEATURES

- Machine structure in painted sheet steel
- Column height 2400 mm
- Reel carriage and turntable transmission with chain kinematics
- Machine management via PLC and 7.2" colour touch screen display
- Safety stop device at the base of the carriage for CE regulations
- Brake engagement/disengagement device to facilitate film engagement at the base of the pallet
- Acoustic warning and flashing light at start of cycle
- Table diameter ø 1650 mm shaped for pallet truck entry
- Film tensioning by mechanical clutch
- Emergency mushroom for CE regulations
- Machine reset button in operation for CE regulations
- Possibility of rear loading of machine with forklift truck
- Inverter for progressive start and indexed table stop
- Cycle counter
- Manual machine management mode

CHANGE PARAMETERS FROM TOUCH SCREEN

- Digital speed control at the base of the pallet (cycle start)
- Digital speed control at the top of the pallet
- Digital adjustment of revolutions at the base of the pallet (end of cycle)
- Digital adjustment of table rotation speed from 0 to 12 rpm
- Digital adjustment of carriage up speed
- Digital adjustment of carriage lowering speed
- Adjusting number of complete cycles
- Digital adjustment of table indexing time
- Digital adjustment of film edge

CYCLES SELECTABLE FROM CONTROL PANEL

- Ascent and descent cycle
- Ascent only cycle
- Reinforcement cycle at preset height (ascent cycle, ascent/descent cycle)
- Cycle with height setting (Altimeter) and photocell reading exclusion
- Ascent and descent cycle for feeder
- No. 10 cycles recallable from control panel for different products to be wound

WORKABLE PRODUCT FEATURES

- Max. product dimensions: L 1000 x W 1200 mm.
- Useful height: H 2200 mm.
- Max. product weight: 1200 Kg.

FILM REEL CHARACTERISTICS

- Max. external dimensions: 280 mm.
- Film inner dimensions: 76 mm.
- Film height: 500 mm.
- Maximum film reel weight: 16 Kg.
- Film thickness: 12 - 35 my